Principal Engineer (Installation)

PURPOSE & SCOPE: During tendering stage, responsible for the review of enquiry documentation and the Scope of Work, perform pre-bid engineering and provide required inputs for bid preparation. After award of Project, carry out allocated duties related to the preparation, and issue of Process & Safety deliverables. This responsibility includes site visits as required and close coordination with Lead Process Engineer, Project Engineering manager, Drafting Office Coordinator and occasionally with client's project team. DUTIES & RESPONSIBILITIES: • Reports to H.O.D. (Process & Safety) and works under his overall supervision. • Reports to Lead Process/ Safety Engineer for day to day work • During tendering stage, reviews enquiry documentation from client together with Scope of Work raises queries where there is lack of clarity, interfaces with other disciplines to ensure integration of activities and finally provide Process inputs during bid preparation. • For projects awarded to NPCC, perform as under: • Perform Site Visits for data collection / verification. • Develop Process Design Basis based on scope of work, subsequent client's clarifications and site visit. • Perform Process simulation and develop Heat & Mass Balance as required. • Perform Pipeline hydraulics. • Perform Flare hydraulics • Perform Fire water networking. • Perform Equipment/Instrument sizing calculations. • Prepares Process Flow Diagrams, P&IDs, Process data sheets, and other Process deliverables. • Prepares Operating Manual and provide support during commissioning and performance run. • Coordinates with the Drafting Office Coordinator for the checking and issuing of drawings. • Provides input for the development of the Planning Package and project progress reporting. • Receives “as built” information from the Project Management Team, reviews content and, if satisfied, passes to drafting for production of drawings. • Trains Entry Level Engineers • Compliance in accordance with HSE standard. Skills Required MINIMUM REQUIREMENTS: • B.Sc. in Chemical Engineering from a reputed institute • Minimum of 3 years experience in the oil and gas plants Design and Engineering. • Extensive Knowledge and expertise in Process Simulation. Have good working experience with common process softwares like HYSIS, PIPESIM, PIPEPHASE; FLARESIM, PHAST PROFESSIONAL.,SAFETI etc. • Proven skills in routine process calculations and use of process software and in-house developed spreadsheets. • Good knowledge of relevant engineering codes and standards. • Good command of written and spoken English and report writing. • Good interpersonal relationship. • Should be familiar with routine safety studies like HAZOP, HAZID, and SIMOPS etc.

We are?  A leading specialist engineering services company delivering integrated solutions for complex energy and infrastructure projects and operating assets. Our business is built on the belief that our people are what make EnerMech excellent. When we are thriving globally it’s not just about investing in our infrastructure, service offering and technology, but by also investing in our people. The Role The primary responsibility is to support the crane maintenance operations on the client platforms as per EnerMech processes and procedures and demonstrate safety leadership and continuous development in all aspects of crane, lifting and support service activities.  Main Responsibilities & Key Result Areas To carry out maintenance duties offshore as directed by the Crane Supervisor or Crane Foreman.   Assign, Direct, and manage lifting maintenance teams, to ensure specified tasks are performed efficiently, fulfilling the required standards.   Direct and carry out the preventive tasks as per schedule for the proper upkeep of the equipment. Assess PM/CM/BK outcomes and failures to update PM scope.   Plan and manage all predictive maintenance activities on all lifting equipment, in close consultation with the line Team Leader in order to execute in a safe, effective, efficient, and economical manner.   Preparation & planning of Major inspection & overhauling for Pedestal Cranes, Lifeboat davit, & gantry cranes and monitoring efficient and timely completion of the works.   Draft, plan work orders and prepare for planned Major shutdown activities through a maintenance management system (SAP) and in close liaison with line Team Leaders to determine priorities to prepare a detailed work schedule and minimize downtime and cost.   Identify & analyze chronic problems, breakdowns, and malfunctions in order to perform effective remedial actions to minimize potential impacts on safety, environments, and production operations; including arranging spares, special tools, and material requirements and directing the team accordingly.   Liaise with relevant personnel in Production, Safety & other Departments to obtain PTW, risk assessment, safe job analysis, and toolbox talks as per the activity requirement.   Ensure that all maintenance and technical documentation is completed correctly, Prepare regular work reports and specific technical reports when required. and maintain record of all maintenance activities for easy access to any internal and external auditors and surveyors.   Identify and evaluate critical asset spares inventory, consumables and special tools. initiate purchase requisitions as required to support and secure the operation requirements, consulting with line Team Leader.   Follow up obsolete spare parts, check availability or equivalent and retrofit/upgrade/replacement of obsolete spares   Evaluate and verify employee performance through the review of completed work assignments and work techniques. Identify staff development and training needs and ensure that training is obtained and appraise their performance on a quarterly and annual basis.   Maintain a high level of HSE awareness and to continue with Risk assessments, toolbox talks, monthly safety meetings & HSE observations and to fully comply with all HSE requirements.   Ensure incidents are correctly reported to enable the correction of the situation and helps prevent similar future occurrences.   initiates the Work Permit by entering the necessary details, Receiving it and complying with its requirements.   Shall be fully aware and understand all relevant regulations and procedures of PTW system.   In the event of an emergency, ensure that the work is suspended, the worksite is left in a safe condition, all sources of ignition have been extinguished, and all machinery has been switched off.   Requirements Mechanical Engineering (or Diploma with reasonable experience).  8-10 years' work experience in offshore lifting equipment operation and maintenance, at least 5 years (s) of working experience in the related field is required for this position.  Must have excellent leadership skills and be able to motivate staff for teamwork.  Good in the English language (reading, writing, and communication skills).  Familiar with the use of computerized maintenance management systems such as SAP.  Good working knowledge of MS Office programs.  Have proven experience in maintenance, troubleshooting, and repair of diesel engines, hydraulic systems, and electrical equipment.  Be verified as competent by NVQ (or equivalent) skills assessors against the competence criteria for maintenance of offshore pedestal cranes, overhead gantry cranes, lifeboats, life raft davits, and winches.  Behaviors and Personal Qualities Essential: Self-motivated.   Good Communication Skills   High standards of workmanship   Ability to work and react under pressure and tight deadlines EnerMech is dedicated to fostering a diverse and inclusive organisation. We believe that diversity enriches our team, and we welcome applications from candidates of all backgrounds, cultures, and identities.  

Roles & Responsibilities Job Description: Safely operate a 3-tonne pickup truck for transporting goods and materials. Ensure timely delivery and pickup as per schedule. Load and unload goods while maintaining proper handling and safety standards. Perform daily vehicle inspections and report maintenance needs. Follow traffic rules, company policies, and delivery instructions. Maintain accurate delivery records and assist in basic documentation. Desired Candidate Profile Valid UAE driving license (Manual, Heavy). Minimum 2 years of driving experience in the UAE. Knowledge of UAE roads and traffic regulations. Physically fit and able to handle loading/unloading tasks. Good communication and time management skills.

Industry: Luxury & Lifestyle We’re looking for a talented Website Developer & SEO Specialist to join our team and help us build, optimize, and manage high-performing commercial websites in the luxury and lifestyle space. If you're passionate about web development, SEO strategy, and user experience—this is the opportunity for you. Google SEO Optimization (on-page, off-page, keyword strategies, technical SEO) • Building and Developing Websites (WordPress, Shopify, or custom development) • Creating and Managing Commercial Websites (e-commerce platforms, payment integration, user experience optimization) Responsibilities: • Design, build, and maintain professional websites that reflect our brand identity. • Optimize websites for SEO to increase visibility and organic traffic. • Set up and manage e-commerce platforms with smooth user experience and ` secure payment gateways. • Monitor website performance and implement continuous improvements. • Stay updated with the latest SEO trends, tools, and Google algorithm updates. Requirements: • Proven track record in SEO and website development. • Experience with CMS platforms (WordPress, Shopify, Wix, or similar). • Knowledge of Google Analytics, Search Console, and SEO tools (Ahrefs, SEMrush, etc.). • Strong understanding of UX/UI and mobile responsiveness. • Ability to work independently and deliver on deadlines. What We Offer: • Exciting projects in the luxury and lifestyle industry. • Competitive compensation package. • Opportunity for long-term collaboration.

Job Type: Part-Time | Remote | Contract-Based Salary: AED 3,000 – 6,000 per month (Weekly and Monthly Payments Available) Job Summary: We are hiring part-time Data Entry Specialists to perform simple typing and data entry tasks from home. This is an excellent opportunity for students, homemakers, freelancers, or anyone looking for flexible income. Key Responsibilities: Enter and update data in online systems or spreadsheet Maintain accuracy and completeness of data Perform regular checks to ensure data quality Follow instructions provided during training Submit work on time and meet assigned deadlines Requirements: Basic computer and typing skills Good attention to detail and accuracy Ability to work independently Access to a laptop or desktop with internet No experience required (training provided) How to Apply: WhatsApp 9 7 1● 5 2● 2 4 0●~0 9 2 2. Benefits: Work from home with flexible hours (2 to 4 hours per day) Training and support provided Weekly and monthly payment No nationality restrictions Skills Typing speed 40 words per minute or more Familiarity with MS Word, Excel, or Google Sheets Time management and self-discipline Strong focus and concentration

Roles & Responsibilities §Safely operate a vehicle to transport our stuff to their destinations while adhering to traffic laws and safety regulations. § Perform routine vehicle inspections to ensure the vehicle is in good working condition. This includes checking fluid levels, tire pressure, and performing basic maintenance tasks such as refueling and cleaning. Finishing the assigned tasks on time § Plan the most efficient routes to reach destinations on time, taking into account factors such as traffic conditions, weather, and road closures. § Maintain accurate records of mileage, fuel consumption, and any incidents or accidents that occur during the course of duty. Complete logbooks, trip sheets, and other required documentation. § Adhere to all relevant laws, regulations, and company policies related to driving and transportation. This includes ensuring the vehicle is properly licensed, registered, and insured. § Ensure timely arrival at scheduled pick-up and drop-off in the airport and assure that the domestic workers not escaped. § Making the cash deposit in the bank in daily basis. Any other assigned job related could applied. Desired Candidate Profile § Female candidate is a must § Philippine or African nationality §High School Certificate § Experience of at least 2 years in the UAE § Holding valid local driving license