Browse
···
Log in / Register
Brand new RAPPORT LONDON Formula Quad Watch Winder - Black63242172301570110
Brand new RAPPORT LONDON Formula Quad Watch Winder - Black63242172301570111
Brand new RAPPORT LONDON Formula Quad Watch Winder - Black63242172301570112
Brand new RAPPORT LONDON Formula Quad Watch Winder - Black63242172301570113
Brand new RAPPORT LONDON Formula Quad Watch Winder - Black63242172301570114
10
AED 4,500

Favourites
Share

Brand new RAPPORT LONDON Formula Quad Watch Winder - Black

addressWX2F+85 Dubai - United Arab Emirates

Description

Brand new RAPPORT LONDON Formula Quad Watch Winder - Black  Perfect Gift for someone that appreciates watches. Winder to keep your Rolex, Omega, Tudor, Breitling, Patel Philippe, or any self winding watch at optimal state and keep the internal mechanism lubricated. Perfect gift, proven quality for over 120 years. FEATURES The Formula features a lockable front, glass door with three distinct stripes across the front, which distinguish this range. This watch winder is a stylish way to keep to your two automatic timepieces running smoothly. A fine watch will last a lifetime if properly cared for, the Formula Watch Winder range promises to do this. An LCD control panel allows you to select a range of settings, with interior lighting for enhanced effect. This luxury watch winder is in Black. WHO IS RAPPORT LONDON? Rapport London’s horological products will help preserve and extend the life of your timepiece. Rapport London is a family-owned company who use many of the same traditions and innovative craftsmanship techniques today that Rapport London have since launching over 120 years ago. SPECIFICATIONS • Four piece watch winder to hold, protect and automatically wind your watches 
 • Black Ebony high gloss case with a bevelled glass front giving it an contemporary look 
• Four individual watch cups with leather holders 
• Touchscreen LCD control panel with multiple rotation and timing settings (TPD found on website) 
• Chrome fittings
 • Lockable case with key
 • Size: w 270x h 300 x d 200mm WHY USE A WATCH WINDER? An automatic watch has a mechanism that requires regular motion to keep the inner spring constantly charged. This motion is usually provided as it is worn. Once removed from the wrist the stored energy will only run for 24-72 hours, depending upon the model, then the watch will need to be manually rewound and reset.

Many automatic watches have additional features, or 'complications' - date/lunar phase/world time etc. so the task of rewinding and recalibrating a watch if it runs down is best avoided.

 Furthermore, watches of such calibre are precision instruments and like all thoroughbreds they actually benefit from exercise - if left unwound for long periods, internal lubrication can be lost from critical areas which will eventually lead to excessive wear on components and subsequent lack of accuracy.

 TECHNICAL • Perpetua Watch Winders have features designed to mimic the action of a watch being worn. The watch is held at a precise angle while being rotated and the winder can be set to run intermittently so that the watch is not permanently fully wound.

 • Luxury soft feel interior
The build quality of these wooden boxes can only be described as luxurious with the outer surfaces being finished with hand applied lacquer and the interiors being lined with a soft feel velvet fabric which not only looks good but adds to the protective environment for your prestigious watches.

 • Choice of settings
Two modes of operation are provided: a fast winding mode, when the drum rotates continuously, and a timed mode which rotates the drum intermittently clock-wise and anticlockwise. 

• Electricity and Mechanical
The control and drive systems operate on a safe low voltage direct current (below 6VDC). Most Rapport winder models can use both batteries or a plugged in DC adaptor interchangeably. • An integrated circuit controls the running of the winder and it is programmed to give an effective winding action and yet controls the consumption of electric power to a very low level.

 • The drive system is housed inside a zinc alloy die cast gear box. • Power is transmitted from a DC motor at one end to an output shaft at the other end smoothly and silently.

The electrical and drive systems are designed with minimum ease of maintenance in mind.

Source:  dubizzle View original post

Location
WX2F+85 Dubai - United Arab Emirates
Show map

dubizzle

You may also like

Cookie
Cookie Settings
Our Apps
Download
Download on the
APP Store
Download
Get it on
Google Play
© 2025 Servanan International Pte. Ltd.