Description

‎‏‎‏STETON FLEXA Wood PVC Machine Italian Excellent Conditio” Market price 38000 The moulding press FLEXA is used to cove shaped panels with thermoplastic sheets (PVC) from one side and/or veneer from one or two sides. ‎‏Press structure profile welded beams, is suitable to bear the high pressures required by this kind of processing. ‎‏Top platen electrically heated. ‎‏The bottom mobile platen is driven by a group of racks acting along the platen width and length and granting a perfect parallelism during platen rise/fall. ‎‏It can be equipped with extractable aluminium tray (one or two) to facilitate manual loading/unloading. O RING silicon sealing wire between fixed platen and extractable tray. ‎‏Heating of pressurising air by means of electric exchanger; the air heating circuit has been conceived to ensure an even heating on the total surface for a perfect final result. ‎‏Air tank connected to the plant. Vacuum device equipped with high power pump for immediate air vacuum. ‎‏Electric control board with PLC to control the working cycle step by step: ‎‏Hydraulic pressure on the platen and air pressure inside the pressurisation chamber ‎‏Air temperature ‎‏Automatic pressure reset device ‎‏Time for automatic opening ‎‏Time for gluing control ‎‏Opening/closing pushbuttons ‎‏TECHNICAL DATA ‎‏Specific working pressure: 6 kg/cm² ‎‏Cylinders diameter: Ø 85 mm. ‎‏Stroke of cylinders: 450 mm. ‎‏Useful working dimensions: 2350×1250 / 2850×1250 mm ‎‏Nr. of pressing cylinders: 12 ‎‏Total pressure: 200 / 240 ton. ‎‏OPTIONAL ‎‏Manual cutter for PVC cut ‎‏Spare membrane 25/14 30/14 ‎‏Loading/unloading tray 25/14 – 30/14 ‎‏Double loading/unloading tray 25/14 – 30/14