Description

Make : FT 580 Clamping Unit : 580 Ton Control : Techmation Screw Dia : 90 mm Year : 2008 Screw L/D Ratio L/D - 20:6 Shot Size (Theoretical) cm³ - 2805 (PS) Injection Weight g - 2560 G Injection Pressure Mpa - 156 Injection Rate into Air cm³/s - 557.2 Injection Stroke mm - 320 Injection Speed mm/s - 185 Screw Speed rpm - 180 Clamping Force KN - 5800 Clamping Stroke mm - 830 Space Between Tie Bars mm - 830×830 Max. mold height mm - 820 Min. mold height mm - 300 Ejector Stroke mm - 200 Max. Pump Pressure Mpa - 17.5 Pump Motor Power KW - 55.7 Heater Power KW - 32.65 VS250EES Calculated injection capacity : 570-678-871 cm3 Actual shot weight-P.S: 541, 644, 827 g Plasticising capacity- PS. : 166-198-252 kg/hr Injection pressure-Max.: 2065, 1735, 1351 kgfcm2 Injection rate: 283-336-432 cm3/sec Screw diameter 55- 60-22 Screw L/D ratio: 22-20.5-18 Screw speed 1~185 Screw stroke 240 Nozzle stroke 450 Nozzle contact force : 7.9 Total heating wattage: 18.3 Clamping force: 250 Ton Clamping stroke-Max. : 580 mm Open daylight-Max. 1130 mm Mold thickness : 250-550 mm Platen dimension: 820x820 mm Ejector stroke: 120 mm Ejector force: 8.5 Pump motor power: 50(37.5) HP(KW) Servo-pump motor power: 30 kw Oil tank capacity: 450 L Max, system pressure: 170 ton Machine weight: 9.6 Machine Dimension: 6850x1500x210